A specialty fertilizer blended specifically for application on Palms and Southern
Ornamentals in the practices of professional arboriculture.
A true concentrated liquid for easy mixing & application. For root injection, soil drench,
or foliar spray application. This solution has a low salt index and is compatible with
fungicides & pesticides.

Mixing rates:
1.25 gallons (1/2 jug) 100 gallons
2.5 gallons (1 jug) 200 gallons
5 gallons (2 jugs) 400 gallons

Application rates:
Palms: the occurrence of root systems on palms is site and specie variable. Determine where the root ball is and how far it extends in
the soil. Soil inject or drench this area to saturation.
Ornamental landscape trees and shrubs: 90% of the fine feeder roots are in the top two feet of soil, with most of those in the top eight
inches. Start your application approximately 2 to 4 feet from the root flare and extend to beyond dripline. The soil should be inoculated with
a root probe going to 4 to 6 inches deep from a power rig set at approx. 150 to 200 psi, depending upon the porosity or density of the soil.
The root area of the tree should be injected in a grid or in concentric circles spacing 3 feet apart. Inject approximately ½ gallon of solution
per injection site. Based on the 3 feet spacing this should put around 150 gallons over 2,000 sq. ft. Site and soil conditions vary, so adjust
your application accordingly. Shake before using.
Guaranteed Analysis:
Total Nitrogen (N)...................................................................... 8.0%
4% Slowly Available Methylene Urea Nitrogen*
4% Urea Nitrogen
Soluble Potash (K20)...............................................................12.0%
Magnesium (Mg)......................................................................0.50%
.05% Water Soluble Magnesium
Iron (Fe)........................................................................................0.50%
.50% Chelated Iron (Fe)
Manganese (Mn)......................................................................0.50%
.50% Chelated Manganese (Mn)
Zinc (Zn).......................................................................................0.07%
.07% Chelated Zinc (Zn)
Derived from: Methylene Urea, Urea, Potassium Acetate, Magnesium Sulphate, Iron EDTA, Manganese EDTA, Zinc EDTA.
*4% Slowly Available Nitrogen from Urea–Triazone